Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).

Interior/Exterior Use
Oils in aqueous dispersion reinforced with resin ready for use for interiors and exteriors.
Odour-free, the product provides a nongreasy, protective film which is perfectly water-resistant, with a pleasant satin appearance.
Easily applied, the oil penetrates deeply to protect the wood from adverse weather conditions and harmful agents, developing tone and natural beauty.
Enriched with UV filters.
Recommendations for application:
Do not apply on heated wood, or in direct sunlight.

Regenerates every type of surface, giving additional protection to the original oil finish of the product. The presence of UV filters and special additives protect the wood from harmful agents, direct sunlight and bad weather. Enhances its natural beauty with a natural satin effect.

Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents.
It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors).
The addition of pigments increases the duration of the coating.

It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).

The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended.
1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.

.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood.
Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect.
UV filters and special additives make it suitable for outdoor use. R
ecommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

Recommendations for application:

Apply evenly by brush or roller.

Naturaqua WPC Deck Sealer
• Overcoatable: 2-4 h at 20°C
• Sanding: not necessary
• Approx. yield: 12-16 m2/Lt.
• Final drying time: 6-12 h at 20°C
• Approx. yield: 14-18 m2/Lt.

Treatment based on oils, waxes and natural resins dispersed in water, created for the protection of composite materials, such as WPC, precompressed wood etc.

Quick to dry, it is strongly water- and oil-repellent, allowing to avoid the formation of unpleasant and persistent stains caused by the absorption of oily substances and dirt.

Enriched with UV filters, it penetrates deeply and guarantees a great adhesion and protection of the treated surfaces.

When dry, it permits to create a pleasant natural effect without changing the WPC tone.

Ideal for composite wood

Naturaqua Decking Oil is a mix of emulsified oils in water reinforced with resins to treat wood intended for outdoor environments. Ready for use.
Over time, it deteriorates but does not flake, is easy to apply and has excellent penetration. Produced with the highest quality raw materials, enriched with special UV filters, it guarantees excellent protection against atmospheric agents. Especially for exterior wood. You are advised not to apply on heated wood, or however in direct sunlight. Ready for use, in time it does not flake off. Easy to use, excellent penetration.
Prepared with high quality raw materials, enriched with UV filters additives, the product guarantees an excellent protection from weathering. Special for exteriors.