Based on natural oils and enriched with high quality resins and waxes, Hard Top Oil gives an excellent protection, with a pleasant natural effect. Suitable for kitchen tables and tops in general, as well as cutting boards and wooden utensils, it is certified for food contact according to EN 71.3, DIN53160 and DIN68861. Also available in the waxy version with natural matt effect Hard Top Oil Natural 6020 . Applicable with brush, rag, roller or spray. However, for a particularly natural effect, we recommend removing the excess with a soft cloth. Allow to dry completely before using the treated object. The chopping boards and in general the items of frequent use can be washed with water and neutral soap; they will be subject to maintenance proportional to the frequency of use. Indicative yield: 14-26m2 / Lt

Based on natural oils and enriched with high quality resins and waxes, Hard Top Oil gives an excellent protection, with a pleasant natural matt effect. Suitable for kitchen tables and worktops in general, as well as cutting boards and wooden kitchen tools, it is certified for food contact according to EN 71.3, DIN53160 and DIN68861. Available in the standard 30 gloss version or in the waxy version with natural matt effect . Applicable with brush, rag, roller or spray. However, for a particularly well-groomed effect, we recommend removing the excess with a soft cloth. Allow to dry completely before using the treated object. The chopping boards and in general the artifacts of frequent use can be washed with water and neutral soap; they will be subject to maintenance according to the frequency of use. Indicative yield: 14-26m2 / Lt

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

Catalyst for two-components oil One coat 2k wood oil in a ratio of 100: 30.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.